KEEWAY F-ACT EVO - Page 155

- 154 -
Implement Regular Inspection (Maintenance Plan)
Measure Idling Emission (Note 1)
Adjust the Carbureter (Note 2)
Strip and Clean Carbureter
(SJ, MJ, SAJ and MAJ)
Change the Carbureter
Strip and Clean the Motor
•Valve (Leakage)
•Plug (Wear-out)
•Combustion Chamber(Clean)
Leave the Factory
Qualified
Qualified
合格
Qualified
Qualified
Qualified
Qualified
8. When repairing the motor ignition system, to dismantle the ignition plug is not allowed. If necessary, time
should be limited.
17.5 Solutions for Idling Emission Amount Surpassing the Rated Value (Two Strokes)
Note 1: Measure with idling measurement process
Note 2: Adjust the motor revolution speed to be within the regulation with retention bolt and measure the idling
CO/HC.