Clutch
Start the engine and increase its speed gradually to check the
working condition of the clutch.
If the motorcycle fails to go and the engine stops, you should
Check the clutch block. If necessary, change a new one.
Front/rear suspension system
Front
Pull the front brake tight and check the absorber.
Check whether the absorber has leakage or loose.
上下压缩：up / down compression
Rear
Check the rear absorber when operating.
Check whether part of the absorber is loose or wear.
Suspend the rear wheel and check it movingly.
Check whether the suspension bushing of the engine is
loose or not.
上下压缩：up / down compression
To Next Page
Loading...
Need help?
General
