KEEWAY F-ACT EVO User Manual

- 58 -
1.7.3 Installation
Install the stator on the body of the engine.
Connect the magnetor terminator.
Clean up the taper part of the bent axle and flywheel.
Install the solid key of the flywheel into the bent axle.
Aim the flywheel groove at the solid key on the axle.
*Note
Ensure there is no bolts inside of the flywheel.
Fix the flywheel with the universal spanner and tighten the fixing screw.
Torque Force Value：9.0 N·m
Install the left body fender.
Flywheel
Cooling Fan
Fan Cover

KEEWAY F-ACT EVO Specifications

General

Brand	KEEWAY
Model	F-ACT EVO
Category	Motorcycle
Language	English