KEM MKC-710 - Parameter Lists

9. Others
MKC-710 117
Parameter list 9-6.
9-6-1.Setup parameters
[Interface]
Parameter and default
Printout
Item
Default
Selection range
Item
Printing
RS-232C
NONE
NONE/COM1/COM2
RS-232C
As displayed
Baud rate
4800bps
300bps/600bps/1200bps/
2400bps/4800bps/9600bps
Baud Rate
As displayed
Parity
-
None/Even/Odd
Parity
As displayed
Stop bits
1
1/2
Stop Bits
As displayed
Data bits
8
7/8
Data Bits
As displayed
Printer
NONE
NONE/ OTHER /DP-USB/
IDP-
Printer
As displayed
Balance
NONE
NONE/KEM/Mettler/A&D
/Shimadzu/Sartorius
/Mettler-Old
Balance
As displayed
Interface
COM1
COM1/COM2
Interface
As displayed
Mode
Continuous
Continuous/Print
Mode
As displayed
USB
Host
Host/MCU
Mode
As displayed
[Beep]
Parameter and default
Item
Default
Selection range
Beep
Set
Set/off
Type
Type1
Type1
/Type2/Type3
/Type4/Type5
[Operator]
Parameter and default
Printout
Item
Default
Selection range
Item
Printing
Current No.
1
01-10
Current No.
As displayed
Operator
-
Within 20 characters
A-Z, +,-,/,*,(,),.,,%
Operator
As displayed