EasyManua.ls Logo

KEM MKC-710 - Report Parameter

KEM MKC-710
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Method
MKC-710 49
Report parameter 4-5.
Report is set when printer is connected.
[Format]
Selection of print format:
x Short :Prints sample number, measurement date, sample size,
measurement results, titration time except measurement
condition.
x GLP :Prints all of measurement parameters and results.
x Off :No printout.
[Data List]
Selection of print out of the data list.
x Off :No printout of data list.
x On :Printout of data list.
[Graph]
Selection of graphic print together with measurement results when they are
printed out.
x Off :No printout of graph
x Form1 :The accumulated titrated water is printed in graphic form. The axis of
accumulated amount is shown in percent, and the evaporation rate
against 100% water at EP is shown on display or printed out.
x Form2 :Titration volume (electrolysis) per set time and accumulated amount are
shown in graph on display or printed out.

Table of Contents