KEM MKC-710 - Anolyte

3. Basic operation
24
3-3-2. Anolyte
To change the life value of catholyte to zero, press [Reagent]→[cathode]→
[Life]→current life value→[0]to[ENTER]key
＜Drain＞
1) To drain out the liquid, use the supplied
washing bottle for drainingct.
＜When do not use the Auto Solvent Change Unit ＞
＜injection＞
1) With Funnel, pour a solvent into the titration cell
100mL. (it becomes 100mL when match it with
the line Lower the titration cell)
2) After changing anolyte, change the life value of anolyte to zero.