KEM MKC-710 - Starting Pre-Titration

5. Function Tools
MKC-710 67
5-5-3.Starting Pre-titration
1) When equipment is the waiting for
preliminary titration, an upside green
button changes to "Pre-titration start."
2) Press “Titration start.”
3) Titration will start. During titration, a
titration curve will appear on the display.
If you press “Titration start” or “Reset,” or
if titration starts, display of titration
results will be cleared.
4) If pre-titration is started, a display will
come “pre-titrating”.
5) After pre-titration is completed, a display
will be the wait stable drift (or drift stable
state).