5. Function Tools
56
5-1-5. History
Check history/record and calibration history/record can be reviewed.
Press [MENU/HOME], select “5.History” with [↑][↓] and press [ENTER]
Calibration results can be reviewed if you print out with [Print] key.
Shows history/record of a periodic check. The measurement result
will appear that set up a Method for check measurement.
The exchange history of an anolyte and a catholyte is displayed.
Up to 10 data can be saved. When exceeding, data will be deleted from the
oldest.
5-1-6. Sample
Sets up sample-related parameters.
Select [SAMPLE] on main screen. Or press [MENU/HOME], select “6.Sample” with
[↑][↓] and press [ENTER].
[Sample No.]
Here you select sample number. The sample number consists of a high order and low
order number. The high order number is a group number for batch calculation. The
low order number counts up after each measurement.
x 00～99
To Next Page
Loading...
