KEM MKC-710 - Starting App

5. Function Tools
66
5) A confirmation message for install will
appear, and press “Install” to start
installation of the app.
6) Press “OK” when installation is completed.
This app will not appear in the app list of the menu even after installation. (It will
appear in the app management.)
5-5-2.Starting app
1) Connect an Android device and the MKC-710
with a USB cable.
2) A confirmation message will appear when
you start the TitrationViewer. Press “OK.”
3) If you wish to start the TitrationViewer every
time you connect the Android device to the
MKC-710, check ““Use by default for this USB
accessory.”
4) The TitrationViewer will start.
* This app cannot be started from the app list or start
record (recently used apps). Always follow the
steps above.