KEM MKC-710 - Method Setup; Method Configuration and Locking

4. Method
36
4. Method
Method 4-1.
For precise measurement effected in a short span of time, it is necessary to
configure conditions appropriate for a sample and a method. The method
consists of information on the measuring conditions, calculation of
concentration, and the like.
MKC-710 can store standard methods (No. 01 through 20). Each method can be named
individually.
A Method consists of, [Titration parameter], [Calculation parameter] and [Report
parameter].
To edit a method, press [MENU/HOME] on the Main screen to display “3.Method”, and
put the cursor on the method to be edited, followed by pressing [ENTER] key.
Each parameter can be selected with corresponding Key on display.
Note
For details of each parameter, refer to individual item in this manual.
[Lock]
Protects method contents.