6. Setup
MKC-710 79
Serial No. 6-4.
Serial No. and the software version of the titrator are shown.
Select “4．Serial No.” with [↑][↓] and press [ENTER].
[Serial No.]
When the multiple sample changer is connected, its serial No. and software version will
also be shown.
Make sure to advise your distributor of the serial No. and the software version
should you require servicing.
[Running Time]
Multiplication of the operation time for measuring equipment is displayed.
LCD Contrast 6-5.
The contrast for LCD can be adjusted.
Select “5．LCD Contrast” with [↑][↓] and press [ENTER].
[LCD Contrast]
Adjust contrast of LCD with 14 steps by [m], [o] key and confirm by [ENTER] key.
To Next Page
Loading...
