KEM MKC-710 - Filling Reagent and Draining; Catholyte

3. Basic operation
MKC-710 23
Filling reagent and draining 3-3.
3-3-1. Catholyte
To change the life value of catholyte to zero, press [Reagent]→「Cathode」→「Life」
→Select reagent of current life value→set [0] → [Enter].
＜Drain＞
3) To drain out the liquid, use the supplied washing
bottle for draining.
Note
When one component cell is used for inner burette, catholyte is not needed
＜ injection ＞
1) Inject 5mL catholyte into the inner burette using a
syringe. (The lower line outside the cell shows
approx.5mL.)
2) After changing catholyte, to change the life value of catholyte to zero.