KEM MKC-710 - Measurement; Entering Weight

5. Function Tools
70
5-5-5.Measurement
1) When titration is finished by reaching an
endpoint, the results will be shown on the
screen.
2) If you press “Titration start” or “Reset,” or
if titration starts, display of titration
results will be cleared.
5-5-6.Entering weight
1) If you touch the edit box on the top of the
display, soft keys will appear. Enter the
weight.
2) If the weight remains unsent,
transmission button will turn light blue.
3) Once you have entered the weight, press
“Wt1or Wt2” button to send the weight.
4) Once the weight has been sent, the
transmission button will turn gray.