5. Function Tools
9) After titration is terminated, the
instrument state becomes ‘post entry
completion standby’ mode. And the upper
green button changes to “Entry
completion”.
10) Enter weight and send it.
11) Press [Entry completion] button to
complete ‘after entry’.
12) Entering weight and pressing [Entry
completion] button before sending the
weight will show the right dialog box.
*When sending entered weight to complete after
entry:
- Check sent weight box and press [Send] button.
*When completing after entry without sending
entered weight:
- Press [Don’t send] button.
*When re-entering weight:
- Press [Cancel] button.
To Next Page
Loading...
