7. Maintenance
MKC-710 87
7-1-6.Check the instrument
Make sure the instrument is not dirty nor stained by visual check. If any dirt is found,
wipe it off with clean gauze. Do not use solvent but use water only.
7-1-7.Check the cable
Make sure by visual check all the cables including power cord, various cables and
electrode lead to see if any dent or bent is found. Replace the cable if it is dent or bent.
7-1-8.Check the connectors
Make sure the connectors are not dusty or rusted. If dusty clean it by a vacuum cleaner.
If rusted, repair is necessary.
To Next Page
Loading...
Need help?
General
