5. Function Tools
54
[Statistics]
Move the cursor to [Statistics] and press [ENTER].
< Search conditions >
You can narrow down the data by selecting the following conditions. Set to narrow
down the condition as for being intended when condition is “On”.
x High sample No. : The high order number for grouping the samples.
x Method No. : The number of Method particular to it.
x Titration Date : The date of measurement when it was performed.
[Execute]
The selected data under the conditions as above will appear as a list of results on
display. And the result can be excluded from a statistic calculation by pressing [←]
on a result display screen. “＊” is displayed on the excluded result before
displaying a result.
[Statistics]
Press [Statistics] on “Results list”. The data on the list are going to be batch
calculated. Move the cursor to [Print] and press [ENTER] to print out the result.
To Next Page
Loading...
