Remote Control 55
Web interface 55
Technical connection details 57
Use the Built-in Help System 58
View the help information for the front panel key 58
View the list of help topics 58
Firmware Update 60
Front Panel Menu Reference 61
2 General Operating Information 62
Turning the Unit On 63
View the error log 64
Controlling the Outputs 65
Step 1 - Select an output (E36233A/E36234A only) 65
Step 2 - Set the output voltage and current 65
Step 3 - Enable the output 67
Step 4 - View the output voltage and current 67
Constant voltage and constant current 67
Using the Protection Function 69
Protection function 69
Configuring protection 69
Clears and OVP and OCP Event 71
Specifying 2-Wire or 4-Wire Sense 72
Specifying the Voltage Slew Rate 73
Using the Tracking Operation (E36233A/E36234A Only) 74
Configuring the Output Turn On Turn Off Sequence (E36233A and E36234A Only) 75
Step 1 – Set the output voltage and current of the output channels: 75
Step 2 – Configure the turn-on turn-off delays: 75
Step 3 – Coupling selected outputs: 76
Step 4 – Use the All Outputs On and Off keys: 76
Specifying the Operation Mode (E36233A and E36234A Only) 78
Using the Digital Control Port 79
Bi-directional digital IO 79
Digital input 81
Fault output 81
Inhibit input 82
Fault/inhibit system protection 83
Trigger input 84
Trigger output 85
Output relay 86
Output couple controls 87
Using the Output LIST 89
Step 1– Add/remove steps to/from the LIST 89
Step 2 – Configure the output sequence 90
Step 3 – Run the output sequence list 92
Using the Data Logger Function 94
Logging data 94
Step 1 – Program the sequence for the output channels 94
Step 2 – Configure the data logger traces 95
Step 3 – Configure the data logger properties 95
Step 4 – Turn on Output 1, start the sequencing and log the data 96
Step 5 – Export the data 96
Keysight E36200 Series User's Guide 3
To Next Page
Loading...
Need help?
General
