E4990A Help
124
Other topics about Setting Up the Display of Measurement Results
Selecting Parameters for both traces 1 and 2
1. Press the Meas > Trace1&2.
2. Select the measurement parameter for the traces 1 and 2.
To select:
Press:
Trace A Trace B
Absolute impedance value Impedance phase
|Z| - θz
Equivalent series resistance Equivalent series reactance
R - X
Equivalent series inductance Equivalent series resistance
Ls - Rs
Equivalent series inductance Q value (Quality factor)
Ls - Q
Equivalent series capacitance Equivalent series resistance
Cs - Rs
Equivalent series capacitance Q value (Quality factor)
Cs - Q
Equivalent series capacitance Dissipation factor
Cs - D
Absolute admittance Admittance phase
|Y| - θy
Equivalent parallel conductance Equivalent parallel susceptance
G - B
Equivalent parallel inductance
Equivalent parallel
conductance
Lp - G
Equivalent parallel inductance Q value
(Quality factor)
Lp - Q
Equivalent parallel capacitance
Equivalent parallel
conductance
Cp - G
To Next Page
Loading...
