Measurement
145
Turning off
discrete
mode
(Discrete
OFF)
The marker can move from one actual measurement
point to another. Because it is interpolated, it can also
move in the space between measurement points.
Turning Discrete Mode On or Off
1. Press Channel Next (or Channel Prev) and Trace Next (or Trace Prev)
to activate the trace on which the discrete mode is set up.
2. Press Marker Fctn.
3. Click Discrete to turn the discrete mode ON or OFF.
Setting up Markers for Each Trace/Setting up Markers for Coupled Operation
between Traces
Makers can be set up and moved either in coupled operation for all traces
in a channel or independently for each trace.
To Next Page
Loading...
