Keysight E4990A - Page 156

E4990A Help
146
Value Description
Marker Couple
is ON
(Coupling ON)
Markers are set up and moved in coupled operation
on all the traces in a channel.
Marker Couple
is OFF
(Coupling OFF)
Markers are set up and moved independently for
each trace.
Turning Marker Coupling On or Off
1. Press Channel Next (or Channel Prev) to activate the channel on which
the marker couple is set.
2. Press Marker Fctn.
3. Click Couple to turn the marker coupling ON or OFF.
Listing Marker Values in All Displayed Channels
You can list all of the marker values in all of the displayed channels on the
screen.
Turning ON the Marker Table Display
1. Press Marker Fctn.
2. Click Marker Table to turn ON the marker table display.
The marker table appears in the lower part of the screen.