Keysight E4990A - Page 357

Programming
347
Preset Value 0
Unit F
Resolution -
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Var= 0.001
Ana.WriteString ":CALC1:EPAR:CIRC:E:C0 " & Str(Var), True
Ana.WriteString ":CALC1:EPAR:CIRC:E:C0?", True
Var=Ana.ReadNumber
Related Commands
:CALC:EPAR:CIRC
Equivalent Softkey
Analysis > Equivalent Circuit > C0
COM Command Syntax (Internal Control Only)
SCPI.CALCULATE(Ch).EPARAMETERS.CIRCUIT.E.C0
:CALC<Ch>:EPAR:CIRC:{F|G}:R0
Type
Command/Query
Syntax
:CALCulate<Ch>:EPARameters:CIRCuit:{F|G}:R0 <Value>
:CALCulate<Ch>:EPARameters:CIRCuit:{F|G}:R0?
Description
This command sets/gets R0 value of equivalent circuit parameters (Models
F and G)
Variable
Parameter Value
Description R0 value
Data Type Numeric type (Real)
Range -1E ~ 1E