Keysight E4990A - Page 359

Programming
349
Preset Value OFF
Query Response
{1|0}<newline><^END>
Examples
Dim Var as Integer
Ana.WriteString ":CALC1:EPAR:DISP ON", True
Ana.WriteString ":CALC1:EPAR:DISP?", True
Var=Ana.ReadNumber
Related Commands
:CALC:EPAR:CIRC
:CALC:EPAR:SIM
Equivalent Softkey
Analysis > Equivalent Circuit > Display
COM Command Syntax (Internal Control Only)
SCPI.CALCULATE(Ch).EPARAMETERS.DISPLAY.STATE
:CALC<Ch>:EPAR:PC0
Type
Query
Syntax
:CALCulate<Ch>:EPARameters:PC0? <value>
Description
This command returns the equivalent circuit parameter C0 (parallel
capacitance) at the specified frequency. The sweep parameter should be
frequency for this analysis.
Variable
Parameter Value
Description Frequency
Data Type Numeric type (Real)
Range 20 to 120M
Unit Hz
Resolution - -