Keysight E4990A - Page 369

Programming
359
frequency)}, {numeric (Ripple 1)}, {numeric (Ripple 2)}, {numeric
(Ripple 3)}
• Ripple 1: the maximum value of the left-side ripple (the sweep
parameter difference between the peak and the left adjacent
negative peak) within the range to the left of the resonant point
within the waveform analysis range.
• Ripple 2: the maximum value of the right-side ripple (the sweep
parameter difference between the peak and the right adjacent
negative peak) within the range between the resonant point and the
anti-resonant point within the waveform analysis range.
• Ripple 3: the maximum value of the left-side ripple within the range
to the right of the resonant point within the waveform analysis
range.
Examples
Dim Var as Variant
Ana.WriteString ":CALC1:FUNC:DATA?", True
Var=Ana.ReadList(ASCIIType_R8, ",")
Related Commands
:CALC:FUNC:TYPE
:CALC:FUNC:EXEC
:CALC:FUNC:POIN