Keysight E4990A - Page 372

E4990A Help
362
:CALCulate[:SELected]:FUNCtion:DOMain:STARt <Value>
:CALCulate[:SELected]:FUNCtion:DOMain:STARt?
Description
This command sets/gets the start value of the analysis range.
When the trace coupling is OFF, the active trace or selected trace is the
target to be set.
Variable
Parameter Value
Description Start value
Data Type Numeric type (Real)
Range -500G ~ 500G
Preset Value 0
Unit -
Resolution -
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Var= 1000000
Ana.WriteString ":CALC1:FUNC:DOM:STAR " & Str(Var), True
Ana.WriteString ":CALC1:FUNC:DOM:STAR?", True
Var=Ana.ReadNumber
Related Commands
:CALC:FUNC:DOM:STOP
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.CALCULATE.SELECTED.FUNCTION.DOMAIN.START
:CALC:FUNC:DOM:STOP
Type
Command/Query