Keysight E4990A - Page 469

Programming
459
This command sets/gets the display position of the marker value on the X-
axis by a percentage of a width of the display span.
Variable
Parameter Value
Description Display position of the marker value on the X-axis
Data Type Numeric type (Integer)
Range -15 to 100
Preset Value 1
Unit %
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Long
Var= -15
Ana.WriteString ":DISP:WIND1:TRAC1:ANN:MARK:POS:X " & Str(Var), True
Ana.WriteString ":DISP:WIND1:TRAC1:ANN:MARK:POS:X?", True
Var=Ana.ReadNumber
Related Commands
:DISP:WIND:TRAC:ANN:MARK:POS:Y
Equivalent Softkey
Marker Fctn > Annotation Options > Marker Info X Pos
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.WINDOW(Ch).TRACE(Tr).ANNOTATION.MARKER.POSITION.
X
:DISP:WIND<Ch>:TRAC<Tr>:ANN:MARK:POS:Y
Type
Command/Query
Syntax
:DISPlay:WINDow<Ch>:TRACe<Tr>:ANNotation:MARKer:POSition:Y
<Value>
:DISPlay:WINDow<Ch>:TRACe<Tr>:ANNotation:MARKer:POSition:Y?
Description