Keysight E4990A - Page 527

Programming
517
Preset Value 16
Unit -
Resolution 1
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Long
Var= 10
Ana.WriteString ":SENS1:AVER:COUN " & Str(Var), True
Ana.WriteString ":SENS1:AVER:COUN?", True
Var=Ana.ReadNumber
Related Commands
:SENS:AVER
Equivalent Softkey
Average > Point Avg Factor
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).AVERAGE.COUNT
:SENS<Ch>:CORR<Type>:CKIT:LOAD:C
Type
Command/Query
Syntax
:SENSe<Ch>:CORRection<Type>:CKIT:LOAD:C <Value>
:SENSe<Ch>:CORRection<Type>:CKIT:LOAD:C?
Description
This command sets/gets the load capacitance value for the user calibration
and fixture compensation.
(<type>: User calibration=1, Fixture Compensation=2)
Variable
Parameter Value
Description Load capacitance value
Data Type Numeric type (Real)