Keysight E4990A - Page 537

Programming
527
Preset
Value
0
Query Response
{numeric 1}, ... , {numeric (n×3+1)}<newline><^END>
Examples
Dim SetTableAry() as Double
SetTableAry = Array(3, 1000000#, 50.1, 0, 2000000#, 50.05, 0, 3000000#, 51, 0)
Ana.WriteString ":SENS1:CORR1:CKIT:OPEN:TABL " & SetTableAry(), True
Ana.WriteString ":SENS1:CORR1:CKIT:OPEN:TABL?", True
SetTableAry=Ana.ReadList(ASCIIType_R8, ",")
Related Commands
:SENS:CORR:CKIT:OPEN:MOD
:SENS:CORR:CKIT:SHOR:TABL
:SENS:CORR:CKIT:LOAD:TABL
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).CORRECTION(Type).CKIT.OPEN.TABLE
:SENS<Ch>:CORR<Type>:CKIT:SHOR:L
Type
Command/Query
Syntax
:SENSe<Ch>:CORRection<Type>:CKIT:SHORt:L <Value>
:SENSe<Ch>:CORRection<Type>:CKIT:SHORt:L?
Description
This command sets/gets the short inductance value for the user calibration
and fixture compensation.
(<type>: User calibration=1, Fixture Compensation=2)
Variable
Parameter Value
Description Short inductance value
Data Type Numeric type (Real)
Range -1M ~ 1M