Keysight E4990A - Page 536

E4990A Help
526
:SENS:CORR:CKIT:OPEN:C
:SENS:CORR:CKIT:OPEN:G
:SENS:CORR:CKIT:OPEN:TABL
Equivalent Softkey
Cal > User Cal > Define Value > Open Model > Equivalent Circuit | f-Z Table
Cal > Fixture Compen > Define Value > Open Model > Equivalent Circuit | f-Z
Table
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).CORRECTION(Type).CKIT.OPEN.MODEL
:SENS<Ch>:CORR<Type>:CKIT:OPEN:TABL
Type
Command/Query
Syntax
:SENSe<Ch>:CORRection<Type>:CKIT:OPEN:TABLe <Value 1>, ... ,
<Value (n×3+1)>
:SENSe<Ch>:CORRection<Type>:CKIT:OPEN:TABLe?
Description
This command defines the table of open model for the user calibration and
fixture compensation.
(<type>: User calibration=1, Fixture Compensation=2)
Variable
Parameter Value
Description
Open standard definition table:
Indicates the array data of 1 + NOP (number of
standard data points) × 3. Where n is an integer
between 1 and NOP.
<value 1> :The number of standard data points you
want to set. Specify an integer ranging 1 to 1601.
<Value (n×3-1)> :Frequency at the n-th of standard
data.
<Value (n×3)> :Real part of data (complex number) at
the n-th standard data point.
<Value (n×3+1)> :Imaginary part of data (complex
number) at the n-th standard data point.
Data Type Variant type Array (Range)