E4990A Help
552
:SENSe<Ch>:DC:MEASure:ENABle {ON|OFF|1|0}
:SENSe<Ch>:DC:MEASure:ENABle?
Description
This command enable/disable DC Monitor measurement at the sweep start.
Variable
Parameter Selection Option
Description DC Monitor measurement On/Off status
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value
OFF
Query Response
{1|0}<newline><^END>
Examples
Dim Var as Integer
Ana.WriteString ":SENS1:DC:MEAS:ENAB ON", True
Ana.WriteString ":SENS1:DC:MEAS:ENAB?", True
Var=Ana.ReadNumber
Related Commands
:SENS:DC:MEAS:DATA:DCI
:SENS:DC:MEAS:DATA:DCV
Equivalent Softkey
Measurement > DC Monitor Setup > DC Monitor
COM Command Syntax (Internal Control Only)
SCPI.SENSE(Ch).DC.MEASURE.ENABLE
:SENS:FIXT:SEL
Type
Command/Query
Syntax
:SENSe:FIXTure:SELect
{FIXT16034E|FIXT16044A|FIXT16047A|FIXT16047D|FIXT16047E|FIXT160
65A|FIXT16089|FIXT16034G|FIXT16034H|FIXT16334A|FIXT16092A|FIXT1
6192A|FIXT16194A|FIXT16196|FIXT16197A|FIXT42941A|ARBitrary}
To Next Page
Loading...
