Keysight E4990A - Page 600

E4990A Help
590
Ana.WriteString ":SOUR:BIAS:CURR:AMPL?", True
Var=Ana.ReadNumber
Related Commands
:SOUR:BIAS:MODE
Equivalent Softkey
Sweep Setup > DC Bias > Current Level
COM Command Syntax (Internal Control Only)
SCPI.SOURCE.BIAS.CURRENT.LEVEL.IMMEDIATE.AMPLITUDE
:SOUR<Ch>:BIAS:CURR:CENT
Type
Command/Query
Syntax
:SOURce<Ch>:BIAS:CURRent:CENTer <Value>
:SOURce<Ch>:BIAS:CURRent:CENTer?
Description
This command sets/gets the center of bias current value in DC bias sweep.
Variable
Parameter Value
Description Center value
Data Type Numeric type (Real)
Range -100m ~ 100m
Preset Value 0
Unit A
Resolution 20μ
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Var= 0.3
Ana.WriteString ":SOUR1:BIAS:CURR:CENT " & Str(Var), True
Ana.WriteString ":SOUR1:BIAS:CURR:CENT?", True
Var=Ana.ReadNumber