Keysight E4990A - Page 606

E4990A Help
596
SCPI.SOURCE(Ch).BIAS.HOLD.OUTPUT
:SOUR<Ch>:BIAS:MODE
Type
Command/Query
Syntax
:SOURce:BIAS:MODE {VOLTage|CURRent}
:SOURce:BIAS:MODE?
Description
This command sets/gets the DC bias mode. This setting is applied for all
channels and traces.
Variable
Parameter Selection Option
Description DC Bias Output Mode
Data Type Character string type (String)
Range VOLTage|CURRent
Preset Value VOLTage
Query Response
{VOLT|CURR}<newline><^END>
Examples
Dim Var as String
Var= "VOLT"
Ana.WriteString ":SOUR:BIAS:MODE " & Var, True
Ana.WriteString ":SOUR:BIAS:MODE?", True
Var=Ana.ReadString
Related Commands
:SOUR:BIAS:CURR:AMPL
:SOUR:BIAS:VOLT
Equivalent Softkey
Sweep Setup > DC Bias > DC Bias Mode
COM Command Syntax (Internal Control Only)
SCPI.SOURCE.BIAS.MODE
:SOUR<Ch>:BIAS:RANG
Type