Keysight E4990A - Page 615

Programming
605
This command sets/gets the stop of bias voltage value in DC bias sweep.
Variable
Parameter Value
Description Stop value
Data Type Numeric type (Real)
Range -40 ~ 40
Preset Value 0
Unit V
Resolution 1m
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Var= 10
Ana.WriteString ":SOUR1:BIAS:VOLT:STOP " & Str(Var), True
Ana.WriteString ":SOUR1:BIAS:VOLT:STOP?", True
Var=Ana.ReadNumber
Related Commands
:SOUR:BIAS:VOLT:STAR
:SOUR:BIAS:MODE
Equivalent Softkey
Stop (in DC Bias voltage sweep)
COM Command Syntax (Internal Control Only)
SCPI.SOURCE(Ch).BIAS.VOLTAGE.STOP
:SOUR<Ch>:CURR
Type
Command/Query
Syntax
:SOURce<Ch>:CURRent[:LEVel][:IMMediate][:AMPLitude] <Value>
:SOURce<Ch>:CURRent[:LEVel][:IMMediate][:AMPLitude]?
Description