Keysight E4990A - Page 648

E4990A Help
638
Command
Syntax
:SYSTem:BEEPer:WARNing:IMMediate
Description
This command sounds a beep for the notification of warning/limit test
results.
Examples
Ana.WriteString ":SYST:BEEP:WARN:IMM", True
Related Commands
:SYST:BEEP:WARN:STAT
:SYST:BEEP:COMP:IMM
Equivalent Softkey
System > Misc Setup > Beeper > Test Beep Warning
COM Command Syntax (Internal Control Only)
SCPI.SYSTEM.BEEPER.WARNING.IMMEDIATE
:SYST:BEEP:WARN:STAT
Type
Command/Query
Syntax
:SYSTem:BEEPer:WARNing:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:WARNing:STATe?
Description
This command turns ON/OFF or return the status of the beeper for the
notification of warning/limit test results.
Variable
Parameter Selection Option
Description
ON/OFF of the beeper for the notification of
warning/limit test result
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset
Value
ON
Query Response