10- 1
Keysight Handheld Analyzers
N9912A User’s Guide
10 Channel Power Meter Mode - Option 311
Channel Power Meter (also known as CPM or Built-in Power Meter) uses the
RF IN connector to make quick and simple power measurements over a
selectable frequency span. A power sensor is NOT required.
In this Chapter
“How to select Reflection Mode” on page 10-3
“Frequency/Span/Step” on page 10-3
“Radio Standard” on page 10-4
“Attenuation” on page 10-4
To Next Page
Loading...
