Keysight N9912A - Marker Settings; Amplitude Markers

Keysight N9912-90001 User’s Guide 13- 11
Pulse Measurements Mode – Option 330
Pulse Measurement Settings
Marker Settings
Markers are not allowed with Meter-style measurements.
Markers are displayed on Tr 1 and also on the zoom trace if the marker is
within the zoom window time span.
Up to six standard markers can be used to provide readouts of the Y-axis
amplitude at the current X-axis location.
The six standard markers can also be used as Delta Markers.
Learn more about standard markers in “All about Markers” on page 16-2.
Amplitude Markers
Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
—Press Marker.
—Then More
.
—Then Ampl Markers
.
— Then choose from the following:
— OFF
Amplitude markers are NOT displayed.
— ON
Amplitude markers ARE displayed at their previous positions.
—Then Ampl Mkr 1 or 2
.
— Enter a value in dBm for the marker using the numeric keypad, the
arrows, or the rotary knob.