Keysight N9912A User Manual

Keysight N9912-90001 User’s Guide 18- 5
System Settings
Display Settings
How to set FieldFox Volume Control
—Press System 7.
—Then Volume
.
— Then use the arrows, the rotary knob, or numeric keypad to enter a
value between 0 (lowest volume) and 100 (highest volume).
—Press Volume
again and select Mute to quickly turn OFF the speaker
volume.
—Press Volume
again to set volume ON to the previous volume control.
Display Settings
You can adjust the FieldFox for optimum viewing in a wide range of lighting
conditions.
Display settings remain through a FieldFox Preset. To cause the display
brightness, color settings, and trace width to remain through a FieldFox shut
down, save the display settings as Preferences. Learn how in “Save and Reset
Preferences” on page 18-8.
Display Brightness
Change the brightness of the background.
How to set Display Brightness
—Press System 7.
—Then Display
.
—Then Brightness
.
— Use the arrows, the rotary knob, or numeric keypad to enter a
value between 0 and 100%.
Display Colors
Change Display Colors to alter the viewing scheme.
How to set Display Colors
—Press System 7.
—Then Display
.
Clean the transflective screen with gentle and minimal wiping using
Isopropyl alcohol applied to a lint-free cloth.

Keysight N9912A Specifications

General

Brand	Keysight
Model	N9912A
Category	Measuring Instruments
Language	English