Keysight N9912A - Edit Keywords

Keysight N9912-90001 User’s Guide 17- 9
File Management
Saving and Recalling Files
— Delete Folder The selected folder and its contents are deleted after a
warning prompt is displayed. A “Parent” folder or system folder can
NOT be deleted.
—Press Exit
when finished.
Edit Keywords
The preselected keywords (FILE, SITE, and so forth) can be edited to meet your
specific needs. Your keywords will remain in the FieldFox until you change
them. Keywords are limited to 30 characters.
How to edit keywords
—Press Save/Recall 9.
—Then More
.
—Then Edit Keywords
.
—Then Next Page
and Previous Page to view all keywords.
— Use the arrows to select a keyword to edit.
— When a keyword is selected, then press Edit
.
— Then choose from the following:
—Press Select
to add the cursor character to the end of the selected
keyword.
—Press Backspace
to erase the last character from the end of the
selected keyword.
—Press Clear
to erase the selected keyword.
How to move the cursor:
— Use the rotary knob to move the cursor along the same row. The cursor will
change rows when it comes to a row end.
— Use the arrows to move the cursor up and down between rows.
When the selected keyword is complete:
—Press Done to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
—Press Cancel
to close the labeler without saving changes.