Keysight N9912-90001 User’s Guide 16- 5
Data Analysis Features
All about Markers
Coupled Markers (NA Mode)
Coupled Markers, available in NA mode only, allows you to simultaneously
create and move markers that have the same number for all traces. For
example, when marker 2 is created on a trace, a marker 2 is created for ALL
traces. When any marker 2 is moved, they all move together to the same
X-axis position.
— Coupled markers are allowed only in NA mode and are relevant only in
multi-trace configurations.
— All markers are either coupled or uncoupled. There can NOT be one marker
coupled and another uncoupled
.
— Peak functions move the marker to the peak on the active trace, while all
other markers move to the same X-axis position.
Figure 16-3 Coupled Markers move on ALL traces at the same time.
How to create Uncoupled Markers
To create markers that are NOT coupled (move independently on each trace):
—Press Marker
.
—Then More
.
—Then Coupled Markers OFF
.
Markers are coupled by default.
To Next Page
Loading...
