18- 8 Keysight N9912-90001 User’s Guide
System Settings
Preferences
18-
How to view and change Preference Quick Settings
—Press System 7.
—Then Preferences
.
—Then Preferences
.
—Press Next Page
and Previous Page to view all settings.
—To change a setting:
— Use the arrows to highlight a setting.
—Then press Edit
. The current setting changes to yellow.
— Some settings require you to press a softkey to change the value.
Otherwise, use the numeric keypad, arrows, or rotary knob
to change the value.
— When finished changing a value, press Done Ed it
.
— When finished changing ALL preferences, press Done
. All changes are
immediately saved as Preferences.
— To exit the editing session without saving changes, press Esc
at any time.
Learn more about these preference settings:
Save and Reset Preferences
All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver and Startup
Mode) can also be made from individual softkey selections throughout the
FieldFox menu structure. However, they remain through a FieldFox shut down
ONLY when the current settings are saved as preferences.
Setting (Learn more...)
“Language” on page 18-9
“Display Settings” on page 18-5
“Audio Beep at Marker Power” on page 8-35
“Date and Time, Format, and Time Zone Settings” on page 18-16
“GPS” on page 18-12
“Distance Units” on page 6-6
“Battery Saver” on page 18-10
“About SNP Files” on page 17-6
To Next Page
Loading...
