Keysight N9912A - How to Define a Channel and Use Channel Scanner

4 Keysight N9912-90001 User’s Guide
Channel Scanner (SA Only and Option 312)
How to Set Up Channel Scanner
——List files (*.csv and *.kml) are save-recalled to:
"CurrentDevice\ChannelScanner\ChannelS
canner\RecordPlayback\"
——Record-Play files are save-recalled to:
"CurrentDevice\ChannelScanner\ChannelS
canner\RecordPlayback\"
Or
— System
– Sets the User Folder to the user defined system
folder path/name:
——List files are save to-from
"CurrentDevice\<UserSelectedFolder>\"
——Record-Play files are save-recalled to:
"CurrentDevice\<UserSelectedFolder>\"
Refer to Chapter 17, “File Management.”.
— Then File Type
— KML (default) or
— CSV
— Then Save Log File
.
7. (Optional) Export KML file into 3rd party mapping software (i.e., Google or
Google Earth)
How to Define a Channel and Use Channel Scanner
Channel definitions consist of the following:
— Each channel is defined by CF and Integration BW.
— Frequency span is set automatically to 1.5 x Integration BW
— Power is measured over the Integration BW
Using Channel Scanner, refer to:
— “Step 1A: Scan Mode: Range Channel Defined” on page 15-5 or
— “Step 1B: Scan Mode: Custom List Channel Defined” on page 15-6
Then:
— “Step 2: Select Display Type” on page 15-7
— “Step 3. Modify Scale and the Display Color Bar Settings” on page 15-11
— “Step 4: Enable Data Logging and Record Results” on page 15-12
— “Save 5: Save the Log Results:” on page 15-14