Keysight N9912-90001 User’s Guide 18- 9
System Settings
Preferences
The table above shows a list of all of these settings and where they are
discussed in this User’s Guide.
How to save current settings as Preferences
— Using softkeys, configure the settings as you would like them to remain.
—Press System 7
.
—Then Preferences
.
—Then Save Current Settings
There is a beep when your settings have been
saved.
—Press Reset Preferences
to restore the factory default settings.
Language
Choose the language in which to display FieldFox softkeys and other
messages.
How to select a Language
—Press System 7.
—Then Preferences
.
—Then Language
.
— Then choose from the following:
— English
— Espanol – Spanish
— Deutsch – German
— Italiano – Italian
— Francais – French
— Russian
— Japanese
— Chinese
— Turkish
Startup Mode
The Startup Mode setting determines the mode that becomes active (visible)
when User Preset is set to OFF (Factory Preset) and the FieldFox is powered
ON. See “User Preset” on page 18-3.
To Next Page
Loading...
Need help?
General
