Keysight N9912A - Trace Settings; Transform Enable; Gate Enable

Keysight N9912-90001 User’s Guide 6- 9
Time Domain – Option 010
Trace Settings
Trace Settings
The following two settings apply to specific traces.
Transform Enable
Enable Time Domain transform for the specific trace.
— Select the trace.
—Press Measure Setup 4
.
—Then Transform
.
— Then choose from:
— On
Trace displays Time Domain data.
— Off
Trace displays frequency domain data.
Gate Enable
Enable Gating for the specific trace.
— Select the trace.
—Press Measure 4
.
—Then Transform
.
— Then choose from:
— On
Trace displays Time Domain data.
— Off
Trace displays frequency domain data.