16- 6 Keysight N9912-90001 User’s Guide
Data Analysis Features
All about Markers
16-
Marker Colors
As shown in the above image, in NA and CAT Modes, markers are the same
color as the trace to which they are assigned. In SA Mode, the marker color is
NOT the same as the trace.
Marker colors can NOT be changed.
Marker Trace (CAT and NA Modes)
The Marker Trace setting is used to move markers between the data trace and
memory trace.
When Coupled Markers is ON, this setting applies to the active marker for ALL
traces that are coupled. Otherwise, this setting applies to the active marker on
only the active trace.
How to move a marker between traces
— With at least one marker present, press Marker then More.
— Then select the marker to move using Marker 1,2,3,4,5,6
.
—Then toggle Marker Trace Auto Data Mem
.
— Auto - Marker resides on data trace when it is visible. Marker resides
on memory trace when only IT is visible (Default setting).
— Data - Marker resides on data trace, even when not visible.
— Mem - Marker resides on memory trace, even when not visible.
Marker Trace (SA Mode)
Marker Trace determines the trace number on which a marker resides. A
marker is created on, or can later be changed to, the trace number specified by
the Marker Trace selection. When changed, a marker moves to the same
X-axis location on the specified trace. Learn more about SA Traces in “Trace
Display States” on page 8-28.
How to move a marker between traces
— With two or more traces present, press Marker and Enter to create a
marker. The marker is created on the current Marker Trace selection
(default setting is 1).
—Then More
.
— Then select the marker to move using Marker 1,2,3,4,5,6
.
—Then toggle Marker Trace 1,2,3,4
.
— The selected marker is moved to the specified trace.
To Next Page
Loading...
