17- 8 Keysight N9912-90001 User’s Guide
File Management
Saving and Recalling Files
17-
— Then choose from the following:
— Copy Select a file or files to copy.
— Then select a device to copy the file to. Choose from Internal
, USB (must be
inserted), or SD Card
(must be inserted).
— Copy All File
All files that appear will be copied. Then select a device to
copy the file to. Choose from Internal, USB (must be inserted), or SD Card
(must be inserted).
— Delete FIle
The selected file is deleted after a warning prompt is displayed.
Manage Folders
You can create new folders, delete old folders, and select the active folder to
which files can be saved. The Parent folder [..] is listed when not in the root
directory.
Press Save/Recall
—Press Save/Recall 9.
—Then More
.
—Then Manage Folders
.
— Then choose from the following:
— Change Folder
Changes the active folder to which files can be saved.
The active device and current folder is displayed at the top of the
screen, and below, a list of files in that folder. Use the arrows to
highlight a folder within the current folder. Each time the Change
Folder softkey is pressed, the highlighted folder becomes the active
folder.
— Create Folder
A new folder is created in the current folder. Select a
name for the new folder from one of the displayed keywords: You can
change these keywords using the following Edit Keywords function.
Refer to “Edit Keywords” on page 17-9.
For Copy File and Copy All Files, files are always copied to a subdirectory
titled Copy_<date.time stamp> of when the file was copied. For example,
“Copy_June.27.2013-00.40.47”. A new subdirectory is created every time
a file is copied. Files can NOT be copied to other folders. To get a file to a
different folder, it must be saved to the specified folder.
Insert only ONE USB Flash Drive in the FieldFox when saving or copying
files.
To Next Page
Loading...
