Keysight N9912A - How to Enter Numeric Values; Multiplier Abbreviations

2- 14 Keysight N9912-90001 User’s Guide
Preparing for Initial Use of Your New FieldFox
How to Enter Numeric Values
2-
How to Enter Numeric Values
Many settings on the FieldFox require the entry of numeric values.
How to enter numeric values
Use any combination of the following keys:
— Numeric 0–9 keys, along with the polarity (+/-
) key.
— Up/Down arrow keys to increment or decrement values.
— Rotary knob to scroll through a set of values.
— Back
erases previously entered values.
— Esc
exits data entry without accepting the new value.
To complete the setting, press Enter
or a different softkey or hardkey.
Multiplier Abbreviations
Many times after entering numeric values, a set of multiplier or suffix softkeys
are presented. The following explains the meaning of these abbreviations.
Select Frequency multipliers as follows:
— GHz Gigahertz (1e9 Hertz)
— MHz
Megahertz (1e6 Hertz)
— KHz
Kilohertz (1e3 Hertz)
— Hz
Hertz
Select Time multipliers as follows:
— s Seconds
— ms
milliseconds (1e–3)
— us
microseconds (1e–6)
— ns
nanoseconds (1e–9)
— ps
picoseconds (1e-12)