14- 1
Keysight Handheld Analyzers
N9912A User’s Guide
14 VVM (Vector Voltmeter) Mode - Option 308
VVM Mode measures the electrical length of cables and other devices. The
1-Port Cable Trimming application displays the electrical length in both
Magnitude and Phase. The 2-Port Transmission measurement displays
Magnitude ONLY.
Figure 14-1 Display for the 1-Port Cable Trimming measurement
In this Chapter
“Overview” on page 14-3
“VVM Mode Settings” on page 14-4
“Measurement Selection” on page 14-4
“Frequency Selection” on page 14-4
“Display Resolution” on page 14-5
“IF Bandwidth” on page 14-5
“Output Power” on page 14-5
“Averaging” on page 14-7
To Next Page
Loading...
