3- 2 Keysight N9912-90001 User’s Guide
CAT (Cable and Antenna Test) Mode
3-
Procedures
See Also
“Return Loss Measurements” on page 3-12
“1-Port Cable Loss Measurements” on page 3-12
“2-Port Insertion Loss Measurements” on page 3-14
“DTF (Distance to Fault) Measurements” on page 4-17
“Calibration for NA, CAT, and VVM Modes” on page 7-1
“All about Markers” on page 16-2
“All about Limit Lines” on page 16-14
“All about Trace Math” on page 16-19
Making 75Ω (ohm) Measurements at the FieldFox Supplemental Online Help:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm
To Next Page
Loading...
