21
6
6
Driving your vehicle Smart regeneration system (If equipped with
smart cruise control)
- The ESC (Electronic Stability
Control) or ABS is operating.
When the Smart Regeneration Sys
-
tem is cancelled automatically,
adjust the vehicle speed directly by
depressing the accelerator or brake
pedal according to the road and
driving conditions ahead.
Resuming Smart Regeneration
System
To re-activate the Smart Regenera
-
tion System while driving:
䳜 Pull and hold the right
side paddle
shifter for more than 1 second
again. Then, AUTO for the regen
-
erative braking level will appear on
the cluster.
Turning Smart Regeneration sys
-
tem off
To turn off the system:
䳜 Shift to P (Pa
rk) and deselect
'User Settings → Convenience →
Smart Regeneration' on the User
Settings mode.
Vehicle-to-Vehicle Distance Recog
-
nition Sensor (Front Radar)
In order for the Smart Regeneration
System to operate properly, always
make sure the radar sensor cover is
clean and free of dirt, snow, and
debris.
Dirt, snow, or foreign substances on
the
le
ns may adversely affect the
sensing performance of the sensor.
In this case, the system operation
may stop temporarily and not oper
-
ate normally.
To Next Page
Loading...
Need help?
General
