61
6
6
Driving your vehicle Smart Cruise Control with Stop & Go System
䳜 SET-: Sets or decreases cruise
control speed.
䳜 : Sets vehicle-to-vehicle dis
-
tance
Setting Smart Cruise Control speed
1. Press the CRUISE button, to turn
the system on. The CRUISE indi
-
cator in the instrument cluster
will illuminate.
2. Accelerate to the desire
d speed.
The smart cruise control speed
can be
set as follows:
䳜 5 mph (10 km/h) ~
100 mph
(160 km/h): when there is no
vehicle in front
䳜 0
mph (0 km/h) ~ 100 mph (160
k
m/h): when there is a vehicle in
front
3. Move the lever down (to SET-),
an
d
release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LCD
screen will illuminate.
4. Release the accelerator pedal.
The desir
e
d speed will automati
-
cally be maintained.
If there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.
Vehicle speed may decrease on an
upward slope and increase on a
downward slope.
The speed will be set to 20 mph (30
km/h)
when there is a vehicle ahead
and your vehicle speed is 0 mph (0
km/h) ~ 20 mph (30 km/h).
To Next Page
Loading...
