Maintenance
228
Wiper blades
Type B
1. Raise the wiper arm.
2. Lift up the wiper blade clip. Then
pull
down the blade assembly and
remove it.
3. Install the new blade assembly.
4. Return the wiper arm on the
windsh
ield.
5. Change POWER button to the ON
position a
nd wiper arms will
return to the normal operating
position.
Replacing rear window wiper blade
1. Raise the wiper arm and pull out
the wiper blade assembly.
2. Install the new blade assembly by
in
serting the center part into the
slot in the wiper arm until it clicks
into place.
3. Make sure the blade assembly is
insta
lled firmly by trying to pull it
slightly.
To prevent damage to the wiper
ar
ms
or other components, have an
authorized Kia dealer replace the
wiper blade.
To Next Page
Loading...
